2 X SOUDAL SEAM SEALER MS – POLYMER, FIX ALL, HIGH TACK COLOUR WHITE WET ON WET

0 out of 5

£14.90

Availability: 6 in stock

Description

 

Description
Fix All High Tack is a high quality, single component joint sealant with high adhesive strength. It is based on MS-Polymer®.
Characteristics
– High initial tack reducing the need for initial support.
– Fast curing, quick build-up of end strength, high sheer strength after full cure (no primer)
– Easy to apply and easy to tool and finish
– Remains elastic after curing
– No odour
– Does not contain isocyanates, silicones nor solvents
– Paintable with all water based paints
– Good colour stability, weather and UV resistance
– Good adhesion on wet substrates
Applications
– Sealing and bonding in the building and construction industry.
– Structural bonding in vibrating constructions.
Directions for use
Joint dimensions:
– Minimal width: 2mm (bonding) 5mm (joints)
– Maximal width: 10mm (bonding) 30mm (joints)
– Minimum depth: 5mm (joints)

Recommendation: width of joint = 2x depth of joint

Application:
Method: Manual- or pneumatic caulking gun
Application temperature: +5°C until +35°C
Cleaning: Fix ALL Cleaner immediately after
application and before curing
Tooling: with soapy solution before skin formation
Repair with: Fix ALL High tack

Remarks

Fix ALL High Tack may be painted, however due to the large number of
paints and varnishes available we strongly suggest a compatibility test
before application. The drying time of alkyd resin based paints may increase.

Fix ALL High Tack can be applied to a wide variety of substrates. Due
to the fact that specific substrates such as plastics, polycarbonate,
etc… may differ from manufacturer to manufacturer, we recommend
preliminary compatibility tests.
– While producing plastics very
often releasing agents, processing aids and other protective agents
(like protection foil) are used. These should be removed prior to
bonding. For optimum adhesion the use of Surface Activator is
recommended.
– This product can not be used as a glazing sealant.

Fix ALL High Tack can be used for bonding of natural stone, but it
cannot be used as a joint sealant on this type of surface. Fix ALL High
Tack can therefore only be used on the bottom of natural stone tiles.
– When applying, make sure not to spill any sealant on the surface of materials.
WATCH DEMO AT
http://www.youtube.com/watch?feature=player_embedded&v=5VWVQ7teD8c

Additional information

Colour

MPN

Brand

EAN